5KM Wire Flame Spray Gun
Engineered to apply any thermal spray wire—from low melting point materials like Zinc and Babbitt to high-melting ones like Stainless Steel and Molybdenum—the Metal Coat 5KM Wire Flame Spray Gun is optimized for automated and high-volume production lines. It supports extended spray durations while ensuring consistent coating performance. Powered by a constant-speed motor, it ensures accurate control of wire feed rate. Its variable-speed motor system guarantees a continuous and smooth wire feed. The gun includes an onboard speed regulator and an external display panel. Maintenance is
straightforward, reducing production downtime significantly.
5KM Wire Flame Spray Setup
Boost your coating operations with the precision and efficiency of the 5KM Wire Flame Spray Setup. This advanced configuration delivers high-performance coatings across large areas, enhancing industrial productivity with reliable and uniform results.
Spray Coating Wires Used
The 5KM Spray Gun can spray any wire made for Thermal Spray from soft, low-melt point materials such as Zinc or Babbitt to high-melt wires such as Stainless or Moly steel. Parts can be easily changed for multiple wire diameters.
| Type | Value |
|---|---|
|
Coating Wire Size |
0.813 to 4.76mm (20 Gauge to 3/16 inch) |
|
Weight (approx. without hose and cables) |
10.8 Kg |
|
Fuel Gas Oxygen |
Acetylene, Hydrogen, Propane, MPS, MAPP, or Natural Gas (Methane) |
|
Compressed Air (Dry & Oil Free) |
0.6 m³/min at 3.4 to 4.5 bar (20 ft³/min at 50 to 65 psi) |
|
Available Extensions |
6 inch, 1 Feet long |
Note:
- The parameters given are only for reference purpose. Actual values may differ depending upon the geometry and size of the job.
- Buyer to specify wire diameter, material and fuel gas to be used while ordering the gun.