Gas Control Unit
Consists of Gas Regulator with pressure gauge for regulating gas flow to wire Flame Spray Gun. It has two pressure gauges to indicate cylinder and delivery pressure.
- Oxygen – 10 Bar
- Pressure Rating-LPG/Propane – 06 Bar
- Acetylene – 2.5 Bar
Air Flow Meter with Hose
The 3AFM Air Flow Meter is a highly accurate, rugged and reliable instrument for regulating and measuring the flow of compressed air in a manual powder or wire combustion spray system.
- Model: 3AFM (Air Flow Meter) Flow Unit in both NLPM & SCFM
Safety Wears
- Metallizing Helmet Lightweight & comfortable with excellent vision. Supplied from a separate air supply which should be filtered by Helmet Air Conditioner.
- Air Breather This is installed in between compressed air line originating from fitting to the operators’ helmets. Activated charcoal is contained in the breather unit which separates the oil traces from the compressed air and clean compressed air is fed to the operator’s helmet.
- Helmet Air Conditioner Air from the air breather is fed to the helmet air conditioner and air is contained before it is fed to the helmet for breathing. It has also a regulator knob so that the operator can regulate the temperature of air fed to the helmet. It is self-driven and doesn’t need external power.
- Ear Muff Lightweight & comfortable. Operator & other personnel close to the spray operation must wear. Protect the operator from noise originating during thermal spray.
- Protective Glass Lightweight & comfortable with excellent vision. Operator & other personnel close to the spray operation must wear.
- Operator Safety Mask Ensure clean breathing air at all times. Conforms to current legislation on breathing air quality.
- Hand Gloves These are made of rubber and have anti-static properties. Hand gloves protect the operators’ hand against flying abrasive and static charge if any.
Hose Kit
Consists of Hose to connect oxygen cylinder & fuel gas cylinder with gas flow meter to spray gun.
- Oxygen Hose – Blue – 3+7 Mtrs.
- Fuel Gas Hose – Red – 3+7 Mtrs.
- Air Hose – Black – 7 Mtrs.
- Gas Flow Meter
Gas Flow Meter
These precision wall mounting Flowmeters are recommended to use with Flame Spray Equipment. Ease of reading enables economic operation and rapid fault diagnosis. The unit incorporates separate flowmeter for both Oxygen and Fuel Gas supplies.
- Model: 3GFM (Gas Flow Meter) Flow Unit in both NLPM & SCFM
- Model: 2GFM (Gas Flow Meter) Supply with % scale of 0 — 100
- 3GFM GAS FLOW METER
- 2GFM GAS FLOW METER
Gas Flow Meter
These precision wall mounting Flowmeters are recommended to use with Flame Spray Equipment. Ease of reading enables economic operation and rapid fault diagnosis. The unit incorporates separate flowmeter for both Oxygen and Fuel Gas supplies.
- Model: 3GFM (Gas Flow Meter) Flow Unit in both NLPM & SCFM
- Model: 2GFM (Gas Flow Meter) Supply with % scale of 0 — 100
- 3GFM GAS FLOW METER
- 2GFM GAS FLOW METER
Extension Nozzles
Where deep bores or recesses are to be sprayed, a range of extension nozzles are available. These allow access of the spray at depths, whilst straight or deflector air caps can be selected to direct the spray stream to the area required.
- Length: 6 INCH/ 1 FOOT
Wire Control Unit
The Wire Reel Stand with Straightener is specifically designed to dispense wires for flame spraying. A wire straightener is included and the unit is capable of handling either reeled or loose coiled wire or spool.
A Trolley with Reel Stand is also available to move the complete system in the shop easily. Flow meters are shown only for representation purpose. They are not supplied with the trolley.